May 28 Loopback adapter now

Using loopback adapter fixed some firewall issues in the past so install loopback adapter and will see if helps with RPi firewall issues.

Setting up loop back device with Windows 7...
Similar but slightly different to: Mar.15 Setting uploop back device post

• Open Device Manager 
• Right click on computer name
• chose add legacy hardware
• Next
• Chose add manually
• Chose Network adapters
• Chose Microsoft and Loopback adapter

Apr. RPi+forte

A first apps using RPi work using wiringPi interface with forte.
This should help Arduino community get onboard faster.

Update (again): wiringPi is under LGPL . 4DIAC under EPL. Told "as long as you only link against an dynamic library (.so) and don't copy their code (i.e., only use their headers) it should be ok."

Picture will be added... doing more testing and working on course. Video in next post.
[Using breadboard with 220 Ohm resistors and 8 LEDs, usually red]

System model

Note: IP address is LAN IP address of the device.

Tired of blinky... here is an app to test LED on various RPi Pins:

Apr.4 4DIAC Communication

The 4DIAC-IDE downloads the FBs to the device to start the application.
However Java does run will on RPi so downloading from Laptop using Publish/Subscribe.
First  simple test is X+3 TestApplication distributed with 4DIAC via the workspace.

[NEXT: DIO (digital input/output) SIFB for RPi]

X+3 TestApplication 
Distributed with 4DIAC via the workspace
2 Devices: 
PC for VISualisation; 
MICROCONTROLLER to do the CALCulation remotely.

1. Laptop displays Input / Output in frame via FBDK
2. Request published to RPi Subscribe
3. RPI will do the calculation of X+3
4. Result published to Laptop Subscribe
5. Laptop displays result

ApplicationTest as-is assumes the same computer is used for both devices.
Want two physically different devices on a LAN: Laptop and RaspberryPi

System Configuration with Devices

[Update: using 224.x.x.x IP address was needed due firewall restrictions, 
regular LAN device IP address will normally work fine.] Broadcast IP address 224.0.1.1: worked for both Publish and Subscribe to RPi.

IP address use must be included in class.  (typo for MICROCONTROLLER corrected 4/5 2:30PM in Vienna)

Test Results with various Publish/Subscribe Broadcast IP addresses

Multicast References: 

• Holobloc IEC 61499 documentation (new!)
• Multicast blog entry on Medo's Home Page
• Wikipedia: Multicast addresses
• IANA
• IP Multicast: Guidelines for Enterprise IP Multicast Address Allocation (CISCO)

Mar.27+ RPi LED SIFB

Update 4/4/12 

• wiringPi code example for a blinky works.
• Code used in a DIO (Digital Input/Output) SIFB compiles.
• Publish/Subscribe problem currently. See next Post for details.
• Neil Higgins got a Blinky from forte working! 
• See 4DIAC / FORTE on Rasperry Pi in 4DIAC Open Discussion
• Our set-ups are different, so both will be instructional.
• not using wiringPi,
• uses Gertboard

Mar.27+ Notes

• RPi Cross compile - hello world
• dev environment and cross-compiler install
• Eclipse properities set-up 
• See notes at bottom of post
• communication set-up for testing (TODO)
• Blinking an LED with C
• Install of WiringPi (includes git-core)
• Install and build on RPi
• Install only on cross-compile computer
• Need for includes for compiles
• Copy the installed wiringPi from RPi to cross-compile computer (TODO)

Notes:
Blinking an LED with C - cross compile with wiringPi
http://hertaville.com/2012/09/28/development-environment-raspberry-pi-cross-compiler/
see Stephan questions and answers


RPi Cross-compile: arm-linux-gnueabihf-g++

Development Environment for the Raspberry Pi using a Cross Compiling Toolchain and Eclipse Posted on September 28, 2012 by halherta

For Eclipse properties C/C++ General -> Paths and Symbols set-up I found it useful (for copy/paste) to list the files needed :
Includes
$HOME/raspberrypi/tools/arm-bcm2708/gcc-linaro-arm-gnueabihf-raspbian/
1 arm-linux-guneabihf/include
2 arm-linux-guneabihf/libc/usr/include
3 lib/arm-linux-guneabihf/4.7.2/include-fixed
4 lib/arm-linux-guneabihf/4.7.2/include
5 lib/arm-linux-guneabihf/4.7.2/finclude


Library paths
$HOME/raspberrypi/tools/arm-bcm2708/gcc-linaro-arm-gnueabihf-raspbian/
1 arm-linux-guneabihf/lib
2 arm-linux-guneabihf/libc/lib
3 arm-linux-guneabihf/libc/lib/arm-linux-guneabihf
4 lib/gcc/arm-linux-guneabihf/4.7.2
5 libexec/gcc/arm-linux-guneabihf/4.7.2

Mar.18-20 RPi + 4DIAC proof of concept

My first 4DIAC RPi tests 

At least 3 others have used RPi with forte already. See forums. I had it easier. Now the Raspian packages are very current.  Traveling next week and have to get my own breadboard and couple other things. But can have software and apps ready to go. No RPi FBs in 4DIAC, but the FB interface for some would be similar to Lego Mindstorms (LMS) and CBC v2 FBs.  

Also I hope to use CBCv2 sensors and small motors with RPi.

Compiled 4diac on RPi. Needed to install more software that were current and instated the first time. Minor problem in 4DIAC development encouraged me to move from default tip to 1.3.1 

Tested using a cross-compiler with Eclipse under Ubuntu.

So far everything seems very straight forward with the RPi
All parts for a proof concept work as 4diac on posix is expected to.

Link collection: [some good, some random]

Control LED by GPIO  on RPi 

• Using pins 6 Ground and GPIO 17
• Install of WiringPi
• git-core installed, too
• Wiring Pi code instructions
• http://www.raspberrypi.org/phpBB3/viewtopic.php?f=33&t=23090
• https://projects.drogon.net/raspberry-pi/wiringpi/functions/
• https://projects.drogon.net/raspberry-pi/wiringpi/pins/
• Starting Link Collection
• Blinking an LED with C
• Hello world in C on RaspberryPi
• http://hertaville.com/2012/09/28/development-environment-raspberry-pi-cross-compiler/
• http://elinux.org/RPi_Tutorials
• Cross-compilation for Raspberry Pi in GCC. Where to start?
• http://linuxtortures.blogspot.fr/2012/07/communicating-with-raspberry-via-gsoap.html
• maybe since uses eclipse

Mar.14-16 RPi moving along

Preliminary information found and tested. 
Next step is with 4DIAC. [next post Wed or Fri]

First RPi boot (Mar.14)
Hardest part was to get all the connectors.
Took less than 30 minutes after had everything.

• Power supply 1.2A / 5V
• Model B instructions says 700mA to 1200mA
• 700mA what chip needs as minimum; may include keyboard and mouse.
• 1200mA so board does not get too hot.
• with micro USB connector 
• [Mobile phone charges can be used if have around 1000mA or more]
• HDMI to DVI-D connector  (to display)
• Select B for digital output
• Keyboard and mouse
• Recommend Ethernet cable 
• No network to plug Ethernet into in lab (due to firewalls)
• Used wireless with mobile phone

First boot worked as documented. 

Commands to remember:

• sudo raspi-config to if forgot anything, like turn on ssh.
• startx  to  graphic interface

Second RPi "configuration" addition and Blinky (Mar.16)

• LapTop and RPi connected to Mobile phone as router
• RPi wifi via LinkSys WiFi USB stick
• wifi via DLink USB with Mobile phone
• see book True WiPi 
• using wpa_gui
• Add and connect to mobile phone
• LinkSys WiFi USB stick
• no USB port extender so plugged in/out keyboard and mouse
• obviously not good idea long-term
• connect using Putty to text screen
• SSH 
• turned on for RPi via raspi-config
• but setting not kept (how)
• use PuTty for laptop
• WPA2 choices
• WPA (TKIP) on mobile phone, but WPA personal on RPI
• AES-based CCMP:  WPA2(AES) on mobile phone and WPA2 CCMP on RPi
• Minor problem: At first the Kindle was on and connected to mobile phone taking 2nd of the 2 connections allowed.

1st RPi test : Turn LED on (Mar.16)
just connect ground pin and 3.3V source pin or 5V source pin (brighter)

• RPi Pins for LED
• All RPi Pins
• General LED background information
• Garage Lab
• With Ada Pi Cobbler

2nd RPi test : Control LED by GPIO (Mar.16)

• Using pins 6 Ground and GPIO 17
• Install of WiringPi

On to C++ and 4DIAC now...

Mar.3 RaspberryPi start-up for course

Quick Set-up Need

RaspberryPi cannot be used straight of the box, because the box only has the 1 small board of the computer. It was designed for using in Computer Science education, so the set-up is a part of this education.  Being low-cost and many have it fits our criteria for use in the course. 

However so our focus stays on the IEC 61499 / 4DIAC course, a quick guide to set-up HW for RaspberryPi projects that map to the lessons is needed.  [This Post will be updated.]

This blog entry will be collection of how-to links used to get going with RaspberryPi: generally; with HW needed for lessons; and to use with 4DIAC. With additional text the better links will go into the course.

Generally

• RI-P quick start guide
• Power supply that uses mini-USB connection with 5 Volts input and at least 700mA.
• Raspian O/S +
• Display set-up (coming)
•  USB Mouse and Keyboard (USB power supply may be needed)
• Alt. Use SSH to use computer keyboard see Jan.7 Tech it Easy Blog post:
• Getting started with Raspberry Pi (without needing a separate keyboard) 

HW needed for lessons

• LED
• Light sensor
• motor  (Gertboard needed)